AccuAir Components
Many
AccuAir Components are also available separately
should you need to upgrade your existing setup or would rather piece
your system together over time. Items like the power supply
kits
make it easy and safe to wire up your air compressor system without
having to make so many trips to the car stereo shop down the road to
gather wiring supplies. Tanks, plumbing kits, filters, and even exhaust
mufflers are available!
Anodized
aluminum tanks are lightweight and corrosion resistant. These units
utilize an extruded center section (no seam) and are 100% TIG welded.
We offer 5 gallon and 3 gallon versions of this tank both available in
either clear or black anodized finishes. These tanks are guaranteed to
prevent corrosion and are rated for up to 200 psi.
This
filter is the perfect solution for preventing debris from entering your
valves. Without this AccuAir component, debris can cause the valves to
leak up or
down occasionally requiring disassembly and cleaning of the valves. A
Schrader valve located at the bottom of the filter allows for
occasional draining. Made of aluminum and black powder
coated, the overall dimensions are only 1.125” x 4”.
Includes (2) 1/4in thread x 3/8 inch tube fittings
This
kit includes everything needed to route the necessary power to the
Single or Dual Compressor Air Management Packages. Routing adequate
power to your compressors previously required a few trips to your local
stereo shop. This Power Supply Kit is the simple solution and includes
one very important safety element; a sealed main system maxi-fuse (70
amps). We have seen too many people skip this step, leaving them at
risk for a massive system short and no way to safely disable the entire
system during vehicle maintenance. Includes: 70Amp Fuse, Fuse Holder,
90Amp Solenoid, & 25ft 6AWG Wire
Most
customers don’t mind hearing the air exhaust from their air springs.
But, if you are looking for the quietest system operation possible,
these mufflers are the perfect solution. The overall dimensions are
0.75” x 3.125” and they simply push into the exhaust ports on the VU4.
Anodized
aluminum tanks are lightweight and corrosion resistant. These units
utilize an extruded center section (no seam) and are 100% TIG welded.
We offer 5 gallon and 3 gallon versions of this tank both available in
either clear or black anodized finishes. These tanks are guaranteed to
prevent corrosion and are rated for up to 200 psi.
This
filter is the perfect solution for preventing debris from entering your
valves. Without this AccuAir component, debris can cause the valves to
leak up or
down occasionally requiring disassembly and cleaning of the valves. A
Schrader valve located at the bottom of the filter allows for
occasional draining. Made of aluminum and black powder
coated, the overall dimensions are only 1.125” x 4”.
Includes (2) 1/4in thread x 3/8 inch tube fittingsThis
kit includes everything needed to route the necessary power to the
Single or Dual Compressor Air Management Packages. Routing adequate
power to your compressors previously required a few trips to your local
stereo shop. This Power Supply Kit is the simple solution and includes
one very important safety element; a sealed main system maxi-fuse (70
amps). We have seen too many people skip this step, leaving them at
risk for a massive system short and no way to safely disable the entire
system during vehicle maintenance. Includes: 70Amp Fuse, Fuse Holder,
90Amp Solenoid, & 25ft 6AWG Wire
Most
customers don’t mind hearing the air exhaust from their air springs.
But, if you are looking for the quietest system operation possible,
these mufflers are the perfect solution. The overall dimensions are
0.75” x 3.125” and they simply push into the exhaust ports on the VU4.
Your Custom Car LLC
3115 N Cannon Blvd
Kannapolis, NC 28083
704-791-4003
Like our Fan Page for cool discounts!!
3115 N Cannon Blvd
Kannapolis, NC 28083
704-791-4003
Like our Fan Page for cool discounts!!
is SAFE with us!