63-87 Chevy C10
Front Air Bag Cups and Plates Set

 63-87 c10 front air bag cups and plates allow you to install air bags to your front suspension and get low!  What makes this kit unique is that these upper plates bolt directly to the cross-member where the OE springs originally sat. Hold/clamp the upper plate to your frame, an mark the hole with a marking pen or chalk.  After marking the holes,  you drill the holes out.  This is where the plate will bolt to the frame.  Next run your airline to the bag and then bolt the bag to the plate.  To finish the install, simply bolt the plate/bag assembly to the  frame. Then install lower bag  cups which bolt to the bottom of the bags and sit in the lower control arm.  Its that easy!  These are constructed of 3/16 inch steel and are laser cut to be very precise.  The mounting holes are cut out to allow you to mount these to any manufacturer's air bags.