A high quality air fitting is crucial when it comes to building a LEAK-FREE air suspension system!  The  fittings we offer are the best money can buy, hands down!

 Our push to connect fittings have a lot of special features that allow them to give you a worry and leak free installation.  These are not cheap plastic fittings that break easily! Each of our fittings an internal brass nipple, a rubber o-ring and a clamping mechanism to completely seal the airline to the fitting from all sides.  To install the airline all you have to do is screw the fitting into its location and simply insert the air line into the fitting until you feel it lock into place.  The hex on the sides of the fitting allows you to tighten up the fitting with a simple hand wrench.  Use Teflon tape or Loctite (vibra-seal 516) thread sealant to completely seal the threads upon installation.  It couldn't be easier to install these fittings!    

These will likely be the last fittings you will ever have to buy, and the electroless nickel plating keeps them looking awesome for years!

We suggest that you should draw out your lines and fittings, and order enough to complete your kit without running to the store every hour or two.

Features include:

• 3/8 inch Pipe Thread
• 1/4 inch Tube Push to Connect
• Meets all requirements for Federal DOT
  Standard 571.106* 49 CFR Ch. V
• Temperature Range: -40°F to 200°F
  working pressure 0 - 1000 psi
• Electroless Nickel Plated brass body
  with a low temperature BUNA-N O-ring
• For use with DOT approved Nylon® tubing
  
  We suggest that you should draw out your lines and fittings, and order enough to complete your kit without running to the store every hour or two.
  
  
  Other sites charge $5.29 for similar fittings
  You Save 33% by shopping with us!
  Our Price is only $3.50 ea
  
  
  
  Click here to return to our air ride products page for more air fittings and other air suspension products we offer!