To start with, the controller for the Airlift Auto Pilot V2 fits in the palm of your hand.  It features a rubberized outer coating to protect it from  occasional drops and scratches and a display that can be changed to any of 512 different colors!  The display shows you the air pressure in each of the four corners of your air suspension (Front Left, Front Right, rear Left and rear Right) as well as the tank air pressure.  A single plug in cord connects the display to the Auto Pilot valve unit.

The Auto Pilot V2 allows you to set up to 8 different presets for your ride height.  For instance, preset 1 would normally be set up to be your desired ride height.  Preset 2 could be set up to be lowest ride height, preset 3 might be used for all the way lowered or aired out.  The presets are completely and easily adjustable to satisfy any ride height you may desire!  Not only does the V2 give you 8 presets, but it also “learns” your vehicle to give you incredibly accurate control at the push of a button.  Whether you are riding low, or at drive height, or all the way up, this system constantly monitors the air pressures and maintains them according to your presets.

Manual mode is also incorporated into the control if you desire to do a little more “switch hitting” and want to lift and lower manually for the ultimate in 4 corner adjustability.  Another cool feature is the “auto ride-height” that activates when you turn on your ignition.  Turn your custom car or truck ignition on and the system will automatically take you up to your preset ride height. This feature can be disabled easily through the control panel.

Want to keep track of how well your air system is running?  The V2 has a diagnostic feature that allows you check your compressor performance and run times.  This high-tech system will also alert you if there is a leak somewhere in your air system (ie. ruptured line, leaking tank, low pressure, etc.).  It will even tell you if something is wrong with your valve!

Installation is a breeze!  After mounting the components, simply hook up a few wires to your battery, one to the ignition, plug up the OEM style harness and you’re ready to go!  The illustrated instruction/owner’s manual will guide you through calibrating the system, setting your presets and how to properly use the system. Each Auto Pilot V2 is 100% function and leak tested at the factory after assembly, so you can cruise the streets in confidence!