Our bolt in s10 notch
kit will help you get your project lower in the rear without bottoming
out on your frame rail! This notch is perfect for those of
you who don't want to weld in a step notch. After installing, your rear
axle will be able to travel several inches upwards past the original
location of the frame rail where you would normally bottom out! This is
installed by bolting them to the rear frame rails directly above your
axle and then cutting the frame between the notch area.
Features
Sold by the pair
bolt on installation
made of 1/4 inch thick steel (thicker than your stock frame rail!)
designed specifically for S10 minitrucks
Provides several of additional space for rear axle to travel